R/C Toys

d58-2 Duo5800 5.8ghz Wireless AV Fpv DiversityReceiver 
5.8GHZ DUAL RECEPTION RECEIVER

The ultimate 5.8Ghz wireless audio video solution. These receiversallow you to use 1 receiver for 2 transmitters at the same time.These D58-2 receivers also support "Diversity Mode", meaning onereceivers with 2 different polarized antennas or 2 different typesof antenna to COMPARE & SWITCH automatically for receiving thebest video signal.  It is the ultimate solution when you havetwo high gain directional antennas or one stock antenna with onehigh gain antenna installed to a DUO5800 D58-2 receiver.  Inaddition, if you have an auto antenna tracker, these receivers arethe must for you antenna tracker!

FEATURE OF DUO5800 DIVERSITY RECEIVER

• Built-in Dual Receiver Automatically for best receptionAutomatic Antenna Switching
• Triple, buffered AV outputs
• Can receive 2 different channels at the same time
• Not affect by 2.4GHz R/C Radios
• AV Receiver with Diversity inputs
• Small, light weight,durable,anodized aluminum case

 D58-2 DIVERSITY DUAL RECEIVER WORKING FREQUENCIES &SPECS

• CH1: 5705MHz
• CH2: 5685MHz
• CH3: 5665MHz
• CH4: 5645MHz
• CH5: 5885MHz
• CH6: 5905MHz
• CH7: 5925MHz
• CH8: 5945MHz
• Video Output: 75Ω/1Vp­p
• Audio Output: 10KΩ/500mVp­p
• TV Scanning System: PAL/NTSC/SECAM
• Input Voltage: 12V/500mA

PURCHASE ConTENT OF D58-2

• 1 x Wireless 5.8GHz AV Receiver D58-2
• 2 x Stereo jack to RCA AV output cable
• 1 x JST Power Core
• 2 x Stock dipole antennas

 THERE ARE TWO MODES CAN BE PERFORMED WITH THESE RECEIVER,HERE IS A BRIEF HOW TO USE DUO5800 DIVERSITY RECEIVER

• To receiver two different channels at the same time (onereceiver two transmitters mode)

1. Mount both antennas on, either the stock ones or yours.
2. Connect the AV cables to the AV output AV1 & AV2, andswitch the desired channel to use.
3. Switch the DIP Switch (POWER ON),  RF indicator will be onto the related receiver.
4. Plug in the power cable, that''s it.

• To perform the diversity mode (two different types of antennas,one transmitter mode)

1. Mount both antennas on first.
2. Connect the AV cable to the "TRACKER link"
3. Switch the DIP switches of "POWER ON" for RX1 & RX2
4. SET RX1 & RX2 to the same channel
5. LED4 as RF1, LED3 as RF2.  The LED indicator will be onand indicates which antenna reception has the strongestreception.  The diversity mode will perform itself 

R/C Toys